Solar System Photography / Techniques / Technology

Re: swore I was going to put out an image tonight

Leave a Comment on Re: swore I was going to put out an image tonight

J, Registax always spools out that I have bad frames. That is unless one uses a source program from Logitec to make the avi. So, I use: http://divfixpp.sourceforge.net/ Works wonders and I […]

READ MORE

ATM

Re: Future Design for the Losmandy

Tagged Leave a Comment on Re: Future Design for the Losmandy

Art Morton wrote: LiteScope Very pretty. Some of these designs only work if you’re in alt-az, where you can control which direction things are going to rotate. I need to get Trixie […]

READ MORE

Focuser / Optics

Re: call me crazy

Tagged , , Leave a Comment on Re: call me crazy

Art Morton wrote: > You hit the cruxes of the matter, the secondary size. The other thing > I remember battling was f/ and being able to see the secondary when > […]

READ MORE

Maintenance

Re: Yes you are crazy

Tagged , , Leave a Comment on Re: Yes you are crazy

Art Morton wrote: > I do not have data to forward, but what I remember is +- 0.00 to > 0.04~0.15 on each axis. I’m averaging more in the 0.2-0.8 range (I’m […]

READ MORE

Uncategorized

Re: Yes you are crazy

Tagged , Leave a Comment on Re: Yes you are crazy

Art Morton wrote: > I will be getting out again. 2 weeks until the next astrophotography moon… > I presume that you have a Focal Reducer for 9.25 and it would be […]

READ MORE

Maintenance

C9.25 radius blocks

Tagged , Leave a Comment on C9.25 radius blocks

I knew I should have bought DC925 rails when I was working on Trixie last summer… I went out and stimulated the Astromart economy and now I have a C9.25 but no […]

READ MORE

Focuser

call me crazy

Tagged Leave a Comment on call me crazy

A, Just ordered a 3/4” travel drawtube from Moonlite. I have to wait for their next CNC run to get it, but he’s only charging me $50 for it. I should be […]

READ MORE

Focuser

Re: shortest possible drawtube?

Tagged , Leave a Comment on Re: shortest possible drawtube?

Hi Ron, When you get back from WSP, and during your next CNC run, whenever that is, I’d like a 3/4” travel drawtube with compression ring fitting. I’d also like to order […]

READ MORE

Astro knowledge / Observing Reports

Re: C9.25 first light

Tagged , , Leave a Comment on Re: C9.25 first light

A, Once and for all, we are talking about two *different* parts of the sky. You are referring to: The Trapezium, Theta Orionis RA: 5h 35m 17s Dec: -5 23′ 27” http://www.astropix.com/HTML/B_WINTER/TRAPEZ.HTM […]

READ MORE

Observing Reports

Re: No Plans Yet

Leave a Comment on Re: No Plans Yet

The natives are all very restless down here; haven’t seen the sun in 3 weeks. Virgins are being sacrificed.

READ MORE

Techniques

Polar Alignment Calculations

Tagged Leave a Comment on Polar Alignment Calculations

Here’s a page that derives Polar Alignment Calculations. (update 5/2020: the original site is gone, so I found the text on Wayback and am inserting it below. This is by the original […]

READ MORE

Gear / Observatory / Telescope

Special Guest Star takes the mount at Hilltop O

Tagged , Leave a Comment on Special Guest Star takes the mount at Hilltop O

The Astro Jedi needed somewhere to store his light sab—- I mean, bucket, and I was only too happy to accommodate him. I have decided that I need to come to a […]

READ MORE

General / Maintenance / Observatory

Dome shutter is motorized again!

Tagged Leave a Comment on Dome shutter is motorized again!

I finally decided to bite the bullet and fix the shutter motor. Things went sideways last winter, and I’ve been opening the shutter manually (and tying it shut with rope, so we […]

READ MORE

ATM

Trixie 2017 – tube mods

Tagged Leave a Comment on Trixie 2017 – tube mods

I finally got around to cutting the MTA-UTA tubes to length; the only eyepiece that would come to focus with the focuser spacer in place is the Televue 55mm Plossl. If I […]

READ MORE