Maintenance / Techniques

dec slop

Tagged , Leave a Comment on dec slop

TRICKS TO SOLVE THE DEC GEAR SLOP/SLOW MOTOR PROBLEMS: DEC axis steps: 1)Before going any further, refer to Mike Dodd’s excellent article over on the CGE group in his folder on Autoguiding […]

READ MORE

Uncategorized

drift alignment

Tagged Leave a Comment on drift alignment

The cheat sheet you found does sound daunting. I find that most of the time too much information is just not useful when you are in the field. There is a time […]

READ MORE

Maintenance / Techniques

backlash correction

Tagged Leave a Comment on backlash correction

There are two adjustments you can make on each axis to minimize backlash, the play in the worm mount and the meshing of the worm to the axis gear. The worms on […]

READ MORE

ATM

Re: whoa

Leave a Comment on Re: whoa

Man that thing must be heavy! I wish i had $600 and a whole lot of extra time on my hands, that would be a pretty sweet month and a half project. […]

READ MORE

Techniques

Polar Alignment Calculations

Tagged Leave a Comment on Polar Alignment Calculations

Here’s a page that derives Polar Alignment Calculations. (update 5/2020: the original site is gone, so I found the text on Wayback and am inserting it below. This is by the original […]

READ MORE

Gear / Observatory / Telescope

Special Guest Star takes the mount at Hilltop O

Tagged , Leave a Comment on Special Guest Star takes the mount at Hilltop O

The Astro Jedi needed somewhere to store his light sab—- I mean, bucket, and I was only too happy to accommodate him. I have decided that I need to come to a […]

READ MORE

General / Maintenance / Observatory

Dome shutter is motorized again!

Tagged Leave a Comment on Dome shutter is motorized again!

I finally decided to bite the bullet and fix the shutter motor. Things went sideways last winter, and I’ve been opening the shutter manually (and tying it shut with rope, so we […]

READ MORE

ATM

Trixie 2017 – tube mods

Tagged Leave a Comment on Trixie 2017 – tube mods

I finally got around to cutting the MTA-UTA tubes to length; the only eyepiece that would come to focus with the focuser spacer in place is the Televue 55mm Plossl. If I […]

READ MORE