Hi James,

Jamesbielaga@aol.com wrote:
> I believe the slew speeds are .3x .5x 2x, 4x 8x and 16x. Manual page
> 4 and 5 cover it.
I think this is correct for the “non-Gemini” drive system (and 2x is the
correct setting for what I’m doing). However, I have Gemini L4, and so

the slew speed is set in the hand paddle, and it’s an integer between 1
and I think 1600.
>
> My guess is you just increase them one at a time as you scroll through
> the hand unit per manual on page 4.
> 1600 is probably 16x. I know Scott says it is pretty small increase
> as you go through the menu.

>
> I would try the 2 or 100 setting and see how fast that is.
OK, I’ll try both of these.
> Try that again and let me know what you come up with so just make sure
> PEC is off or you only get guide rates.
OK, I’ll try it and get back to you. PEC is definitely off.

Best,

Jimbo

Leave a Reply

Your email address will not be published. Required fields are marked *