-
Archives
- January 2018
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- January 2017
- April 2014
- December 2013
- November 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- May 2011
- March 2011
- February 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- February 2009
- October 2008
- September 2008
- August 2008
- July 2008
-
Meta
Tag Archives: Table Saw
CNC Build, Day 21 – Tooling up the tablesaw
I decided to start working on the feed tables for the tablesaw today. I went out to the shop and got 2 critical measurements: the height of the tablesaw’s surface, and the thickness of the closet doors. With those in … Continue reading
CNC Build, Day 20 – back in the saddle
I finally forced myself back out to the shop to work on the CNC machine again. With graphics in-hand, I was able to put together toolpaths and get the parts cut out. An aside; there is no direct “mirror” function … Continue reading
CNC Build, Day 19 – more graphics
I need to recut one gantry side and part of the vacuum shoe. I spent some time tonight getting into CamBam and shoving parts around to set up the new board. It turns out that CamBam does not have a … Continue reading
CNC Build, Day 10 (cont) – Table design (and tablesaw accessories)
OK. The table. The table from the CNC machine is going to be made up of a torsion box, I think 5″ high (4″ risers, 3/4″ top, 1/4″ bottom). There will be some legs supporting it, but the torsion box … Continue reading