-
Archives
- January 2018
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- January 2017
- April 2014
- December 2013
- November 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- May 2011
- March 2011
- February 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- February 2009
- October 2008
- September 2008
- August 2008
- July 2008
-
Meta
Tag Archives: CNC
CNC Build, Day 25 – Grid wars
I got all the stringers cut to 15″, and the rafters cut to length as well, and I was ready to reconfigure the shop to start building the table. In the online torsion box video I watched, the presenter spent … Continue reading
CNC Build, Day 24 – I get by with a little help…
With the feed tables finished, I was ready to start cutting the MDF for the torsion box down to size. I’d realized that there was no way that I could do the biggest of the cuts without a friend to … Continue reading
CNC Build, Interim – Super-PID arrives
I have been wanting computer control of the router for awhile now, so when Super-PID went on sale for the month of October, I jumped on it. Super-PID will give me a lot more than just on/off control of the … Continue reading
CNC Build, Day 20 – back in the saddle
I finally forced myself back out to the shop to work on the CNC machine again. With graphics in-hand, I was able to put together toolpaths and get the parts cut out. An aside; there is no direct “mirror” function … Continue reading
CNC Build, Day 19 – more graphics
I need to recut one gantry side and part of the vacuum shoe. I spent some time tonight getting into CamBam and shoving parts around to set up the new board. It turns out that CamBam does not have a … Continue reading
CNC Build, Day 18 – long hiatus
The marathon session of weekend before last resulted in some injuries that I needed to heal from. My right thumb and wrist were strained in a way that made it difficult for me to get a solid grip on anything. … Continue reading
CNC Build, Day 17 – ran out of steam
I just couldn’t face another marathon session today. I put some time in, and I got some good work done, but I quit before dinner and took the evening off. I started the day at Home Depot. I knew that … Continue reading
CNC Build, Day 16 – A very full day
I got up fairly early this morning and started working on the CNC build. I think I was in the shop before 9am. In a burst of inspiration, I decided that since the machine was already lined up and ready … Continue reading
CNC Build, Day 15 – Eating through endmills quickly
I really like the 4-flute endmills. They leave a very clean edge on the cuts, and I feel like they eat wood better than the 2-flute bits. But they seem to foul pretty quickly. I started through the cut-out pass … Continue reading
CNC Build, Day 14 – CNC gymnastics
I went out and cut the 4 “scrap” boards to size so that I could cut out the parts I’ve been working on for the past couple of days. I decided to do the cuts on the tablesaw, my first … Continue reading