-
Archives
- January 2018
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- January 2017
- April 2014
- December 2013
- November 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- May 2011
- March 2011
- February 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- February 2009
- October 2008
- September 2008
- August 2008
- July 2008
-
Meta
Category Archives: Woodworking
CNC Build, Day 20 – Robot self-upgrades!
I designed a new router mount for the CNC machine today, and the CNC machine cut it out! Long build notes below, but I just can’t help a “brag photo” first: oooh, pretty! OK, here’s how that object came to … Continue reading
CNC Build, Day 19 – Excuses to shop
I sent off the broken motor and motor controller today. It will be interesting to see how long it takes to get parts back. I really need a new way of mounting the router, because the current method eats up … Continue reading
CNC Build, Day 18 – First Sawdust!
Mellow greetings from my new robot friend. The “spare” Z axis motor arrived today. A bit of solder and I was ready to test it out. It took a little bit of time to get the hang of the basis … Continue reading
CNC Build, Day 17 – homefield advantage
I got the CNC machine unpacked and put back together today. I had in my mind that this is one of the last times I am going to be doing this, so I was careful to make sure that the … Continue reading
CNC Build, Day 16 – on the road again
Keling has agreed to replace my faulty stepper motor; I just have to send it back with a copy of the invoice. Gecko has agreed to replace my faulty motor controller (I confirmed that it is just the single axis, … Continue reading
CNC Build, Day 13, part 2 – First sawdust
I got a chance to install the control software (Mach3) and try out the machine tonight. It went about as well as I expected. I got all 3 axes to jog, but I need to tune the step size, because … Continue reading
CNC Build, Day 13 – Finished!
I came to the machine today knowing that I just had a few last pieces to complete before the machine was done. I drilled the Z-axis motor mounts (no measuring required — I just taped them to an already-complete motor … Continue reading
CNC Build Day 12 – Final cuts
I borrowed a mouse from my father-in-law, and worked on cleaning up the CNC PC. It didn’t really go all that well, but I do have a working mouse. I also checked the third critical measurement again, and cut the … Continue reading
CNC Build, Day 11 – back in the saddle
I got a good solid evening in today. I decided to drill the holes to attach the Y-axis rail, because it was bothering me. That was pretty easy, although I busted a 1/8″ drill bit. Probably needed a new one … Continue reading
CNC Build, Day 10 – Things you can get done when you can’t get anything done
I spent the past couple of days driving up to WA for summer vacation. I packed the CNC machine in the trailer; it takes up a little less room than a telescope imaging rig. Everything seems to have made it … Continue reading
Posted in Electronics, Making, Woodworking
Leave a comment