-
Archives
- January 2018
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- January 2017
- April 2014
- December 2013
- November 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- May 2011
- March 2011
- February 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- February 2009
- October 2008
- September 2008
- August 2008
- July 2008
-
Meta
Monthly Archives: April 2012
CNC – cable runs
I spent some time in the shop today, getting the cables run on the CNC machine. It’s been another one of those long hiatuses, and I needed to get out there and make the thing cut. I needed to crimp … Continue reading
CNC – thinking about wires
I spent Saturday running the soldering iron. Among other things, I was able to construct a trio of Hall Effect switches that I’m going to install on the CNC machine as home switches. I breadboarded, then soldered the circuits together … Continue reading
Insane URL-fu
I had an interesting use case. I needed to get some data out of a database, and then return the result in a graph. So far, the thing is not so interesting. However, there were a few twists. First twist, … Continue reading