-
Archives
- January 2018
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- January 2017
- April 2014
- December 2013
- November 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- May 2011
- March 2011
- February 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- February 2009
- October 2008
- September 2008
- August 2008
- July 2008
-
Meta
Monthly Archives: October 2011
CNC Build, Interim – Super-PID arrives
I have been wanting computer control of the router for awhile now, so when Super-PID went on sale for the month of October, I jumped on it. Super-PID will give me a lot more than just on/off control of the … Continue reading
XBMC Pronto CCF
Many moons ago, some kind soul set up a Pronto CCF that has every single “OBC” (which I think means “original button control”) code that XBMC understands, and put it up on sourceforge in the XBMC repository. That was 7 … Continue reading
CNC Build, Day 23 – tables tables tables
I didn’t get a whole lot of time today to work on the feed tables, but it was enough to get all the 2x3s cut to length for the rest of the tables and legs, and to get the T’s … Continue reading
CNC Build, Day 22 – Feed me
I spent the day working on feed tables. Since I’m not really working from a plan, there are a few things that I’m having to figure out as I go along. I imagine that someday I’ll be an experienced enough … Continue reading
CNC Build, Day 21 – Tooling up the tablesaw
I decided to start working on the feed tables for the tablesaw today. I went out to the shop and got 2 critical measurements: the height of the tablesaw’s surface, and the thickness of the closet doors. With those in … Continue reading
CNC Build, Day 20 – back in the saddle
I finally forced myself back out to the shop to work on the CNC machine again. With graphics in-hand, I was able to put together toolpaths and get the parts cut out. An aside; there is no direct “mirror” function … Continue reading
CNC Build, Day 19 – more graphics
I need to recut one gantry side and part of the vacuum shoe. I spent some time tonight getting into CamBam and shoving parts around to set up the new board. It turns out that CamBam does not have a … Continue reading
CNC Build, Day 18 – long hiatus
The marathon session of weekend before last resulted in some injuries that I needed to heal from. My right thumb and wrist were strained in a way that made it difficult for me to get a solid grip on anything. … Continue reading